Croc Crete

Read This Before Using Acid that Eats Concrete to Clear

Read This Before Using Acid that Eats Concrete to Clear your Drains

Thinking of using acid that eats concrete to clear your clogged drains? This is the go-to method for many homeowners but is it the best method available? Probably not. But it’s the easiest method available so a lot of homeowners turn to it in order to save money. The problem is that acid can cause a lot of damage if used incorrectly. It’s also quite dangerous since it emits fumes and has harmful effects if it comes into contact with skin.

Using acid requires experience and that’s one thing that most homeowners so not have. But if you’re determined to use acid that eats concrete, then keep reading because we’ll try to walk you through the process. Before you even think about using acid though, make sure you understand the dangers that come with it, and always consult and professional.

Does Acid Actually Dissolve Concrete?

Yes. Acid dissolves concrete, but it’s important to use it properly. For starters, make sure that you don’t get the acid near water since that creates a dangerous reaction.

Phosphoric acid, trisodium phosphate, and muriatic acid all dissolve concrete. Phosphoric acid is the most common acid used for this task. Only use muriatic acid after removing all other acids. It’s vital that it’s not mixed with other types of acid. Doing so will result in dangerous reactions.

These acids will dissolve concrete but they will also damage pipes if used incorrectly. So you should always use caution. This is where experience plays a heavy factor and why most homeowners eventually opt for a professional.

If you’re looking for a more biodegradable solution but also acid based to dissolve concrete, then Croc Crete is a great choice. This product is the best option for cleaning concrete and will dissolve hardened concrete from pipes, equipment, and other areas without damaging property.

Hazards of Using Acid to Clean Pipes

Using raw acid to clear concrete from pipes is an option, but it is a dangerous one. It has the potential to damage masonry, pipes and can even kill plants. Acids are also notorious for corroding metals.

Also never re-pour acid down the drain after you have finished cleaning it. Leaving it in the drain will damage your plumbing system.

The best and safest solution to cleaning concrete and pipes is to use a concrete dissolver like Croc Crete. Concrete dissolvers like Croc Crete transform concrete into a liquid form, making it easier to remove. While it might be a little more expensive than using raw acid, it’s usually the most effective in the long term. Damage from acid compounds the problem.

Acid should only be a last resort when all other methods fail and only under the guidance of a professional.

Follow These Safety Tips When Using Acid that Eats Concrete

If you’re still determined to clear concrete using acid, then make sure you follow these vital safety tips. Do not ignore them.

  • Make sure the area has proper ventilation. Open windows, doors, and use fans to keep the air fresh.
  • Always wear goggles and gloves to protect your body from accidental splashes. Even a small drop of acid can lead to significant injuries.
  • Pour acid into the drain slowly. Not only does this prevent splashing, it also keeps the acid from bubbling and spewing when the drain is severely clogged.
  • Read all manufacturer instructions and be sure to keep unwanted water away from the acid. Water activates certain acids and will become volatile if it comes into contact with too much water.
  • Never use acid with other chemicals. This can lead to seriously dangerous reactions.
  • Keep baking soda nearby since it can neutralize acid. This is just in case there is spillage.
  • Clean up excess acid quickly. It will quickly damage siding, doors, and paint finishes.
  • You should also remove any large protrusions before applying acid.
  • Use a plastic tarp to protect your assets like carpet and surfaces.

Step-by-Step Instructions for Using Acid to Clear Concrete

Again, inexperienced homeowners should seek professional help when cleaning cement from their pipes. Using acid might seem like the easiest option, but it is also the most dangerous.

But if you still choose to go this route, you must follow these instructions. Also be sure you read the instructions that come with the acid and follow them, even if they deviate from this text. Different formulas might have different reactions. There’s no way to account for all of them.

Step 1: Put Safety First

Put on your goggles, gloves, organic acid respirator, and other protective equipment before starting. Make sure all areas of your skin are covered.

Additionally, place a tarp over all surfaces and assets that you wouldn’t want to see damaged during the process. Open all windows and doors. Use fans to ensure the air is properly circulated throughout the room.

Baking Soda should be kept in the immediate area. Go ahead and open the box so it’s ready to pour in a moment’s notice.

Step 2: Apply Acid

Follow the instructions that come with the acid and mix in the water that is required. Always add acid to water so that it doesn’t splatter. Now apply the acid to the affected area or pour it into the drain.

If the concrete is on a surface, scrub it with a brush so that the acid gets into the concrete. Now let it sit for a minute or two and then try to scrape the concrete away with a putty knife.

If the concrete is in a drain, then run a plumber’s snake into the drain and carefully try to break away the concrete.

Step 3: Clean the Affected Area

After several minutes have passed, rinse the entire area with water. Again, refer to the manufacturer’s instructions to determine exactly how long you need to wait before washing away the acid. Exposing acid to too much water in a short time is hazardous so carefully read the instructions.

Final Tips for Using Acid

Using acid that eats concrete is always risky so be sure that safety is your primary concern. If you have no experience with acid, then consult a professional on its use. For homeowners, using a non-acid based dissolver is a much safer option and has a lower risk of damaging property. Croc Crete effectively removes concrete from pipes and equipment safely and effectively.

Safer Methods for Removing Concrete

Most inexperienced homeowners instantly turn to acid as a concrete-removal method. But in reality, acid is the last resort when all other methods fail. The truth is that there are several ways to get the job done. Each method comes with its own risks and benefits.

Keep in mind that all methods of removing concrete are risky so be careful. This should never be attempted by homeowners without experience working with concrete.

The first alternative method is high-pressure jet blasting. Start by inspecting the affected area to determine the exact size and composition of the concrete. Then use a jet blaster to dislodge the concrete. The problem is that jet blasting has the potential to damage valuable assets so it’s best to use a professional service. However, homeowners with experience using a jet blaster should try this method since it’s low risk.

The next alternative to acid is using a plumbing snake to dislodge the concrete. This method only works for drains. Also, using a plumbing snake risks damage to the pipes but that risk is much lower than it is with jet blasting and acid. The problem is that the odds of a plumbing snake working are quite low. It’s worth a shot though! Just run the snake down the drain and then flush it with water. Hopefully, this clears the drain.

Concrete dissolvers are the best method for removing concrete. They attack concrete at the source and transform it into its base, liquid form. Concrete is then washed away using water. Croc Crete is the best concrete dissolver on the market! It’s guaranteed to clean concrete from surfaces, pipes, and tools without damaging your property!

If all else fails, then you have to replace the affected pipe or surface. Explore all other options before committing to a full replacement. This is an expensive option so seek advice from professionals to determine if there are other options available.

Final Thoughts

The best way to clear concrete blockages is to hire a professional service and ask about concrete softeners like Croc Crete. Concrete dissolvers convert concrete back into liquid form. Liquid concrete is easy to wash away. Depending on the size of the blockage, it could take several applications to completely dissolve the concrete.

Croc Crete comes in 1 Gallon, 2.5 Gallon, and 5 Gallon quantities so be sure that you buy the right amount. It’s available online and in stores nationwide. Learn more about the most powerful concrete dissolver by clicking here!

Share this post

Contact Us International Orders

Contact Us International Orders